Create and Configure Changefeeds

On this page

Core and Enterprise changefeeds offer different levels of configurability. Enterprise changefeeds allow for active changefeed jobs to be paused, resumed, and canceled.

This page describes:

• Guidelines to consider before creating a changefeed.
• Reference examples for creating and managing a changefeed.

Before you create a changefeed

1. Enable rangefeeds on CockroachDB Advanced and CockroachDB self-hosted. Refer to Enable rangefeeds for instructions.
2. Decide on whether you will run an Enterprise or basic changefeed. Refer to the Overview page for a comparative capability table.
3. Plan the number of changefeeds versus the number of tables to include in a single changefeed for your cluster. We recommend limiting the number of changefeeds per cluster to 80. Refer to System resources and running changefeeds and Recommendations for the number of target tables.
4. Consider whether your Enterprise changefeed use case would be better served by change data capture queries that can filter data on a single table. CDC queries can improve the efficiency of changefeeds because the job will not need to encode as much change data.
5. Read the Considerations section that provides information on changefeed interactions that could affect how you configure or run your changefeed.

Enable rangefeeds

Changefeeds connect to a long-lived request called a rangefeed, which pushes changes as they happen. This reduces the latency of row changes, as well as reduces transaction restarts on tables being watched by a changefeed for some workloads.

Rangefeeds must be enabled for a changefeed to work. To enable the cluster setting:

SET CLUSTER SETTING kv.rangefeed.enabled = true;

Any created changefeeds will error until this setting is enabled. If you are working on a CockroachDB Serverless cluster, the kv.rangefeed.enabled cluster setting is enabled by default.

Enabling rangefeeds has a small performance cost (about a 5–10% increase in write latencies), whether or not the rangefeed is being used in a changefeed. When kv.rangefeed.enabled is set to true, a small portion of the latency cost is caused by additional write event information that is sent to the Raft log and for replication. The remainder of the latency cost is incurred once a changefeed is running; the write event information is reconstructed and sent to an active rangefeed, which will push the event to the changefeed.

For further detail on performance-related configuration, refer to the Advanced Changefeed Confguration page.

Recommendations for the number of target tables

When creating a changefeed, it's important to consider the number of changefeeds versus the number of tables to include in a single changefeed:

• Changefeeds each have their own memory overhead, so every running changefeed will increase total memory usage.
• Creating a single changefeed that will watch hundreds of tables can affect the performance of a changefeed by introducing coupling, where the performance of a target table affects the performance of the changefeed watching it. For example, any schema change on any of the tables will affect the entire changefeed's performance.

To watch multiple tables, we recommend creating a changefeed with a comma-separated list of tables. However, we do not recommend creating a single changefeed for watching hundreds of tables.

Cockroach Labs recommends monitoring your changefeeds to track retryable errors and protected timestamp usage. Refer to the Monitor and Debug Changefeeds page for more information.

System resources and running changefeeds

When you are running more than 10 changefeeds on a cluster, it is important to monitor the CPU usage. A larger cluster will be able to run more changefeeds concurrently compared to a smaller cluster with more limited resources.

To maintain a high number of changefeeds in your cluster:

• Connect to different nodes to create each changefeed. The node on which you start the changefeed will become the coordinator node for the changefeed job. The coordinator node acts as an administrator: keeping track of all other nodes during job execution and the changefeed work as it completes. As a result, this node will use more resources for the changefeed job. Refer to How does an Enterprise changefeed work? for more detail.
• Consider logically grouping the target tables into one changefeed. When a changefeed pauses, it will stop emitting messages for the target tables. Grouping tables of related data into a single changefeed may make sense for your workload. However, we do not recommend watching hundreds of tables in a single changefeed. Refer to Garbage collection and changefeeds for more detail on protecting data from garbage collection when a changefeed is paused.

Considerations

• If you require resolved message frequency under 30s, then you must set the min_checkpoint_frequency option to at least the desired resolved frequency.
• Many DDL queries (including TRUNCATE, DROP TABLE, and queries that add a column family) will cause errors on a changefeed watching the affected tables. You will need to start a new changefeed. If a table is truncated that a changefeed with on_error='pause' is watching, you will also need to start a new changefeed. See change data capture Known Limitations for more detail.
• Partial or intermittent sink unavailability may impact changefeed stability. If a sink is unavailable, messages can't send, which means that a changefeed's high-water mark timestamp is at risk of falling behind the cluster's garbage collection window. Throughput and latency can be affected once the sink is available again. However, ordering guarantees will still hold for as long as a changefeed remains active.
• When an IMPORT INTO statement is run, any current changefeed jobs targeting that table will fail.
• After you restore from a full-cluster backup, changefeed jobs will not resume on the new cluster. It is necessary to manually create the changefeeds following the full-cluster restore.
• As of v22.1, changefeeds filter out VIRTUAL computed columns from events by default. This is a backward-incompatible change. To maintain the changefeed behavior in previous versions where NULL values are emitted for virtual computed columns, see the virtual_columns option for more detail.

The following Enterprise and Core sections outline how to create and configure each type of changefeed:

CREATE CHANGEFEED FOR TABLE table_name, table_name2 INTO '{scheme}://{host}:{port}?{query_parameters}';

SHOW CHANGEFEED JOBS;

    job_id             |                                                                                   description                                                                  | ...
+----------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------+ ...
  685724608744325121   | CREATE CHANGEFEED FOR TABLE mytable INTO 'kafka://localhost:9092' WITH confluent_schema_registry = 'http://localhost:8081', format = 'avro', resolved, updated | ...
  685723987509116929   | CREATE CHANGEFEED FOR TABLE mytable INTO 'kafka://localhost:9092' WITH confluent_schema_registry = 'http://localhost:8081', format = 'avro', resolved, updated | ...
(2 rows)

SHOW CHANGEFEED JOB {job_id};

        job_id       |                                     description                                      | user_name | status  |              running_status              |          created           |          started           | finished |          modified          |      high_water_timestamp      | error |    sink_uri    |  full_table_names   | topics | format
---------------------+--------------------------------------------------------------------------------------+-----------+---------+------------------------------------------+----------------------------+----------------------------+----------+----------------------------+--------------------------------+-------+----------------+---------------------+--------+----------
  866218332400680961 | CREATE CHANGEFEED FOR TABLE movr.users INTO 'external://aws' WITH format = 'parquet' | root      | running | running: resolved=1684438482.937939878,0 | 2023-05-18 14:14:16.323465 | 2023-05-18 14:14:16.360245 | NULL     | 2023-05-18 19:35:16.120407 | 1684438482937939878.0000000000 |       | external://aws | {movr.public.users} | NULL   | parquet
(1 row)

SELECT job_id, sink_uri, status, format FROM [SHOW CHANGEFEED JOBS] WHERE job_id = 997306743028908033;

        job_id       |    sink_uri      | status   | format
---------------------+------------------+----------+---------
  997306743028908033 | external://kafka | running  | json

PAUSE JOB job_id;

RESUME JOB job_id;

CANCEL JOB job_id;

ALTER CHANGEFEED job_id {ADD table DROP table SET option UNSET option};

PAUSE JOBS (WITH x AS (SHOW CHANGEFEED JOBS) SELECT job_id FROM x WHERE status = ('running'));

RESUME JOBS (WITH x AS (SHOW CHANGEFEED JOBS) SELECT job_id FROM x WHERE status = ('paused'));

EXPERIMENTAL CHANGEFEED FOR table_name;

Known limitations

• Changefeed target options are limited to tables and column families. #73435

• VPC Peering and AWS PrivateLink in CockroachDB Advanced clusters do not support connecting to a Kafka sink's internal IP addresses for changefeeds. To connect to a Kafka sink from CockroachDB Advanced, it is necessary to expose the Kafka cluster's external IP address and open ports with firewall rules to allow access from a CockroachDB Advanced cluster.

• Webhook sinks only support HTTPS. Use the insecure_tls_skip_verify parameter when testing to disable certificate verification; however, this still requires HTTPS and certificates. #73431

• Formats for changefeed messages are not supported by all changefeed sinks. Refer to the Changefeed Sinks page for details on compatible formats with each sink and the format option to specify a changefeed message format. #73432

• Using the split_column_families and resolved options on the same changefeed will cause an error when using the following sinks: Kafka and Google Cloud Pub/Sub. Instead, use the individual FAMILY keyword to specify column families when creating a changefeed. #79452

• Changefeed types are not fully integrated with user-defined composite types. Running changefeeds with user-defined composite types is in Preview. Certain changefeed types do not support user-defined composite types. Refer to the change data capture Known Limitations for more detail. The following limitations apply:

  • A changefeed in Avro format will not be able to serialize user-defined composite (tuple) types. #102903
  • A changefeed emitting CSV will include AS labels in the message format when the changefeed serializes a user-defined composite type. #102905

• After the failover process for physical cluster replication, scheduled changefeeds will continue on the promoted cluster. You will need to manage pausing or canceling the schedule on the promoted standby cluster to avoid two clusters running the same changefeed to one sink. #123776

• ALTER CHANGEFEED is not fully supported with changefeeds that use CDC queries. You can alter the options that a changefeed uses, but you cannot alter the changefeed target tables. #83033

• Creating a changefeed with CDC queries on tables with more than one column family is not supported. #127761

• When you create a changefeed on a table with more than one column family , the changefeed will emit messages per column family in separate streams. As a result, changefeed messages for different column families will arrive at the sink under separate topics. #127736

See also

• SHOW JOBS
• EXPERIMENTAL CHANGEFEED FOR
• CREATE CHANGEFEED

Was this helpful?