Operational FAQs

On this page

Why is my process hanging when I try to start nodes with the --background flag?

Check whether you have previously run a multi-node cluster using the same data directory. If you have not, refer to Troubleshoot Cluster Setup.

If you have previously started and stopped a multi-node cluster, and are now trying to bring it back up, note the following:

The --background flag of cockroach start causes the start command to wait until the node has fully initialized and is able to start serving queries. In addition, to keep your data consistent, CockroachDB waits until a majority of nodes are running. This means that if only one node of a three-node cluster is running, that one node will not be operational.

As a result, starting nodes with the --background flag will cause cockroach start to hang until a majority of nodes are fully initialized.

To restart your cluster, you should either:

• Use multiple terminals to start multiple nodes at once.
• Start each node in the background using your shell's functionality (e.g., cockroach start &) instead of using the --background flag.

Why is memory usage increasing despite lack of traffic?

Like most databases, CockroachDB caches the most recently accessed data in memory so that it can provide faster reads, and its periodic writes of time-series data cause that cache size to increase until it hits its configured limit. For information about manually controlling the cache size, see Recommended Production Settings.

Why is disk usage increasing despite lack of writes?

The time-series data used in the DB Console is stored within the cluster and accumulates for 10 days before it starts to be truncated. As a result, for the first 10 days or so of a cluster's life, you will see a steady increase in disk usage and the number of ranges even if you are not writing data to the cluster.

CockroachDB writes about 15 KiB per second per node to the time-series database. About half of that is optimized away by the storage engine. Therefore an estimated calculation of how much data will be stored in the time-series database is:

8 KiB * 24 hours * 3600 seconds/hour * number of days

Given the 10 day accumulation period, you can expect storage per node to increase by about the following amount:

8 * 24 * 3600 * 10 = 6912000

or about 6 GiB. With on-disk compression, the actual disk usage is likely to be about 4 GiB.

However, depending on your usage of time-series charts in the DB Console, you may prefer to reduce the amount of disk used by time-series data. To reduce the amount of time-series data stored, or to disable it altogether, refer to Can I reduce or disable the storage of time-series data?

What is the internal-delete-old-sql-stats process and why is it consuming my resources?

When a query is executed, a process records query execution statistics on system tables. This is done by recording SQL statement fingerprints.

The CockroachDB internal-delete-old-sql-stats process cleans up query execution statistics collected on system tables, including system.statement_statistics and system.transaction_statistics. These system tables have a default row limit of 1 million, set by the sql.stats.persisted_rows.max cluster setting. When this limit is exceeded, there is an hourly cleanup job that deletes all of the data that surpasses the row limit, starting with the oldest data first. For more information about the cleanup job, use the following query:

> SELECT * FROM crdb_internal.jobs WHERE job_type='AUTO SQL STATS COMPACTION';

In general, the internal-delete-old-sql-stats process is not expected to impact cluster performance. There are a few cases where there has been a spike in CPU due to an incredibly large amount of data being processed; however, those cases were resolved through workload optimizations and general improvements over time.

Can I reduce or disable the storage of time-series data?

Yes, you can either reduce the interval for time-series storage or disable time-series storage entirely.

After reducing or disabling time-series storage, it can take up to 24 hours for time-series data to be deleted and for the change to be reflected in DB Console metrics.

Reduce the interval for time-series storage

By default, CockroachDB stores time-series data at 10s resolution for 10 days. This data is aggregated into time-series data at 30m resolution, which is stored for 90 days.

To reduce the interval for storage of time-series data:

• For data stored at 10s resolution, change the timeseries.storage.resolution_10s.ttl cluster setting to an INTERVAL value less than 240h0m0s (10 days).

For example, to change the storage interval for time-series data at 10s resolution to 5 days, run the following SET CLUSTER SETTING command:

  > SET CLUSTER SETTING timeseries.storage.resolution_10s.ttl = '120h0m0s';

  > SHOW CLUSTER SETTING timeseries.storage.resolution_10s.ttl;

    timeseries.storage.resolution_10s.ttl
  +---------------------------------------+
    120:00:00
  (1 row)

Note that this data is still aggregated into data at 30m resolution, which is stored for 90 days by default.

• For data stored at 30m resolution, change the timeseries.storage.resolution_30m.ttl cluster setting to an INTERVAL value less than 2160h0m0s (90 days).

Disable time-series storage

Disabling time-series storage is recommended only if you exclusively use a third-party tool such as Prometheus for time-series monitoring. Prometheus and other such tools do not rely on CockroachDB-stored time-series data; instead, they ingest metrics exported by CockroachDB from memory and then store the data themselves.

To disable the storage of time-series data, run the following command:

> SET CLUSTER SETTING timeseries.storage.enabled = false;

> SHOW CLUSTER SETTING timeseries.storage.enabled;

  timeseries.storage.enabled
+----------------------------+
            false
(1 row)

If you want all existing time-series data to be deleted, also change both the timeseries.storage.resolution_10s.ttl and timeseries.storage.resolution_30m.ttl cluster settings:

> SET CLUSTER SETTING timeseries.storage.resolution_10s.ttl = '0s';

> SET CLUSTER SETTING timeseries.storage.resolution_30m.ttl = '0s';

What happens when a node runs out of disk space?

When a node runs out of disk space, it shuts down and cannot be restarted until space is freed up.

To prepare for this case, CockroachDB automatically creates an emergency ballast file in each node's storage directory that can be deleted to free up enough space to be able to restart the node.

For more information about troubleshooting disk usage issues, see storage issues.

Why would increasing the number of nodes not result in more operations per second?

If queries operate on different data, then increasing the number of nodes should improve the overall throughput (transactions/second or QPS).

However, if your queries operate on the same data, you may be observing transaction contention. For details, see Transaction Contention.

Why does CockroachDB collect anonymized cluster usage details by default?

Cockroach Labs collects information about CockroachDB's real-world usage to help prioritize the development of product features. We choose our default as "opt-in" to strengthen the information collected, and are careful to send only anonymous, aggregate usage statistics. For details on what information is collected and how to opt out, see Diagnostics Reporting.

What happens when node clocks are not properly synchronized?

CockroachDB requires moderate levels of clock synchronization to preserve data consistency. For this reason, when a node detects that its clock is out of sync with at least half of the other nodes in the cluster by 80% of the maximum offset allowed, it spontaneously shuts down. This offset defaults to 500ms but can be changed via the --max-offset flag when starting each node.

While serializable consistency is maintained regardless of clock skew, skew outside the configured clock offset bounds can result in violations of single-key linearizability between causally dependent transactions. It's therefore important to prevent clocks from drifting too far by running NTP or other clock synchronization software on each node.

In very rare cases, CockroachDB can momentarily run with a stale clock. This can happen when using vMotion, which can suspend a VM running CockroachDB, migrate it to different hardware, and resume it. This will cause CockroachDB to be out of sync for a short period before it jumps to the correct time. During this window, it would be possible for a client to read stale data and write data derived from stale reads. By enabling the server.clock.forward_jump_check_enabled cluster setting, you can be alerted when the CockroachDB clock jumps forward, indicating it had been running with a stale clock. To protect against this on vMotion, however, use the --clock-device flag to specify a PTP hardware clock for CockroachDB to use when querying the current time. When doing so, you should not enable server.clock.forward_jump_check_enabled because forward jumps will be expected and harmless. For more information on how --clock-device interacts with vMotion, see this blog post.

Considerations

When setting up clock synchronization:

• All nodes in the cluster must be synced to the same time source, or to different sources that implement leap second smearing in the same way. For example, Google and Amazon have time sources that are compatible with each other (they implement leap second smearing in the same way), but are incompatible with the default NTP pool (which does not implement leap second smearing).
• For nodes running in AWS, we recommend Amazon Time Sync Service. For nodes running in GCP, we recommend Google's internal NTP service. For nodes running elsewhere, we recommend Google Public NTP. Note that the Google and Amazon time services can be mixed with each other, but they cannot be mixed with other time services (unless you have verified leap second behavior). Either all of your nodes should use the Google and Amazon services, or none of them should.
• If you do not want to use the Google or Amazon time sources, you can use chrony and enable client-side leap smearing, unless the time source you're using already does server-side smearing. In most cases, we recommend the Google Public NTP time source because it handles smearing the leap second. If you use a different NTP time source that doesn't smear the leap second, you must configure client-side smearing manually and do so in the same way on each machine.
• Do not run more than one clock sync service on VMs where cockroach is running.
• For new clusters using the multi-region SQL abstractions, Cockroach Labs recommends lowering the --max-offset setting to 250ms. This setting is especially helpful for lowering the write latency of global tables. For existing clusters, changing the setting will require restarting all of the nodes in your cluster at the same time; it cannot be done with a rolling restart.

Tutorials

For guidance on synchronizing clocks, see the tutorial for your deployment environment:

How can I tell how well node clocks are synchronized?

As explained in more detail in our monitoring documentation, each CockroachDB node exports a wide variety of metrics at http://<host>:<http-port>/_status/vars in the format used by the popular Prometheus timeseries database. Two of these metrics export how close each node's clock is to the clock of all other nodes:

As described in the above answer, a node will shut down if the mean offset of its clock from the other nodes' clocks exceeds 80% of the maximum offset allowed. It's recommended to monitor the clock_offset_meannanos metric and alert if it's approaching the 80% threshold of your cluster's configured max offset.

You can also see these metrics in the Clock Offset graph on the DB Console.

How do I prepare for planned node maintenance?

Perform a node shutdown to temporarily stop a node that you plan to restart.

See also

• Production Checklist
• Product FAQs
• SQL FAQs

Was this helpful?