Configure Replication Zones

On this page Carat arrow pointing down
Warning:
As of November 10, 2018, CockroachDB v1.0 is no longer supported. For more details, refer to the Release Support Policy.

In CockroachDB, you use replication zones to control the number and location of replicas for specific sets of data, both when replicas are first added and when they are rebalanced to maintain cluster equilibrium. Initially, there is a single, default replication zone for the entire cluster. You can adjust this default zone as well as add zones for individual databases and tables as needed. For example, you might use the default zone to replicate most data in a cluster normally within a single datacenter, while creating a specific zone to more highly replicate a certain database or table across multiple datacenters and geographies.

This page explains how replication zones work and how to use the cockroach zone command to configure them.

Note:
Currently, only the root user can configure replication zones.

Overview

Replication Zone Levels

There are three replication zone levels:

When replicating a piece of data, CockroachDB uses the most granular zone available: If there's a replication zone for the table containing the data, CockroachDB uses it; otherwise, it uses the replication zone for the database containing the data. If there's no applicable table or database replication zone, CockroachDB uses the cluster-wide replication zone.

In addition to the databases and tables that are visible via SQL, CockroachDB stores additional internal data in what are called system ranges. You can configure replication zones for parts of these internal data ranges if you'd like to override the cluster-wide settings. See Create a Replication Zone for System Ranges for more details.

Replication Zone Format

A replication zone is specified in YAML format and looks like this:

range_min_bytes: <size-in-bytes>
range_max_bytes: <size-in-bytes>
gc:
  ttlseconds: <time-in-seconds>
num_replicas: <number-of-replicas>
constraints: [comma-separated constraint list]
Field Description
range_min_bytes Not yet implemented.
range_max_bytes The maximum size, in bytes, for a range of data in the zone. When a range reaches this size, CockroachDB will split it into two ranges.

Default: 67108864 (64MiB)
ttlseconds The number of seconds overwritten values will be retained before garbage collection. Smaller values can save disk space if values are frequently overwritten; larger values increase the range allowed for AS OF SYSTEM TIME queries, also know as Time Travel Queries.

It is not recommended to set this below 600 (10 minutes); doing so will cause problems for long-running queries. Also, since all versions of a row are stored in a single range that never splits, it is not recommended to set this so high that all the changes to a row in that time period could add up to more than 64MiB; such oversized ranges could contribute to the server running out of memory or other problems.

Default: 86400 (24 hours)
num_replicas The number of replicas in the zone.

Default: 3
constraints A comma-separated list of required and/or prohibited constraints influencing the location of replicas. See Constraints in Replication Zones for more details.

Default: No constraints, with CockroachDB locating each replica on a unique node and attempting to spread replicas evenly across localities.

Replication Constraints

The location of replicas, both when they are first added and when they are rebalanced to maintain cluster equilibrium, is based on the interplay between descriptive attributes assigned to nodes and constraints set in zone configurations.

Tip:
For demonstrations of how to set node attributes and replication constraints in different scenarios, see Scenario-based Examples below.

Descriptive Attributes Assigned to Nodes

When starting a node with the cockroach start command, you can assign the following types of descriptive attributes:

Attribute Type Description
Node Locality Using the --locality flag, you can assign arbitrary key-value pairs that describe the locality of the node. Locality might include country, region, datacenter, rack, etc. CockroachDB attempts to spread replicas evenly across the cluster based on locality.

The key-value pairs should be ordered from most inclusive to least inclusive. For example, a country locality should be specified before datacenter, which should in turn be specified before rack. Also, the keys and the order of key-value pairs must be the same on all nodes, and it's typically better to include more pairs than fewer. For example:

--locality=region=east,datacenter=us-east-1
--locality=region=east,datacenter=us-east-2
--locality=region=west,datacenter=us-west-1
Node Capability Using the --attrs flag, you can specify node capability, which might include specialized hardware or number of cores, for example:

--attrs=ram:64gb
Store Type/Capability Using the attrs field of the --store flag, you can specify disk type or capability, for example:

--store=path=/mnt/ssd01,attrs=ssd
--store=path=/mnt/hda1,attrs=hdd:7200rpm

Constraints in Replication Zones

The node-level and store-level descriptive attributes mentioned above can be used as the following types of constraints in replication zones to influence the location of replicas. However, note the following general guidance:

  • When locality is the only consideration for replication, it's recommended to set locality on nodes without specifying any constraints in zone configurations. In the absence of constraints, CockroachDB attempts to spread replicas evenly across the cluster based on locality.
  • Required and prohibited constraints are useful in special situations where, for example, data must or must not be stored in a specific country or on a specific type of machine.
Constraint Type Description Syntax
Required When placing replicas, the cluster will consider only nodes/stores with matching attributes. When there are no matching nodes/stores with capacity, new replicas will not be added. [+ssd]
Prohibited When placing replicas, the cluster will ignore nodes/stores with matching attributes. When there are no alternate nodes/stores with capacity, new replicas will not be added. [-ssd]

Node/Replica Recommendations

See Cluster Topography recommendations for production deployments.

Subcommands

Subcommand Usage
ls List all replication zones.
get View the YAML contents of a replication zone.
set Create or edit a replication zone.
rm Remove a replication zone.

Synopsis

# List all replication zones:
$ cockroach zone ls <flags>

# View the default replication zone for the cluster:
$ cockroach zone get .default <flags>

# View the replication zone for a database:
$ cockroach zone get <database> <flags>

# View the replication zone for a table:
$ cockroach zone get <database.table> <flags>

# Edit the default replication zone for the cluster:
$ cockroach zone set .default --file=<zone-content.yaml> <flags>

# Create/edit the replication zone for a database:
$ cockroach zone set <database> --file=<zone-conent.yaml> <flags>

# Create/edit the replication zone for a table:
$ cockroach zone set <database.table> --file=<zone-content.yaml> <flags>

# Remove the replication zone for a database:
$ cockroach zone rm <database> <flags>

# Remove the replication zone for a table:
$ cockroach zone rm <database.table> <flags>

# View help:
$ cockroach zone --help
$ cockroach zone ls --help
$ cockroach zone get --help
$ cockroach zone set --help
$ cockroach zone rm --help

Flags

The zone command and subcommands support the following general-use and logging flags.

General

Flag Description
--certs-dir The path to the certificate directory. The directory must contain valid certificates if running in secure mode.

Env Variable: COCKROACH_CERTS_DIR
Default: ${HOME}/.cockroach-certs/
--database
-d
Not currently implemented.
--disable-replication Disable replication in the zone by setting the zone's replica count to 1. This is equivalent to setting num_replicas: 1.
--file
-f
The path to the YAML file defining the zone configuration. To pass the zone configuration via the standard input, set this flag to -.

This flag is relevant only for the set subcommand.
--host The server host to connect to. This can be the address of any node in the cluster.

Env Variable: COCKROACH_HOST
Default: localhost
--insecure Run in insecure mode. If this flag is not set, the --certs-dir flag must point to valid certificates.

Env Variable: COCKROACH_INSECURE
Default: false
--port
-p
The server port to connect to.

Env Variable: COCKROACH_PORT
Default: 26257
--url The connection URL. If you use this flag, do not set any other connection flags.

For insecure connections, the URL format is:
--url=postgresql://<user>@<host>:<port>/<database>?sslmode=disable

For secure connections, the URL format is:
--url=postgresql://<user>@<host>:<port>/<database>
with the following parameters in the query string:
sslcert=<path-to-client-crt>
sslkey=<path-to-client-key>
sslmode=verify-full
sslrootcert=<path-to-ca-crt>

Env Variable: COCKROACH_URL
--user
-u
The user connecting to the database. Currently, only the root user can configure replication zones.

Env Variable: COCKROACH_USER
Default: root

Logging

By default, the zone command logs errors to stderr.

If you need to troubleshoot this command's behavior, you can change its logging behavior.

Basic Examples

These examples focus on the basic approach and syntax for working with zone configuration. For examples demonstrating how to use constraints, see Scenario-based Examples.

View the Default Replication Zone

The cluster-wide replication zone (.default) is initially set to replicate data to any three nodes in your cluster, with ranges in each replica splitting once they get larger than 67108864 bytes.

To view the default replication zone, use the cockroach zone get .default command with appropriate flags:

icon/buttons/copy
$ cockroach zone get .default --insecure
.default
range_min_bytes: 1048576
range_max_bytes: 67108864
gc:
  ttlseconds: 86400
num_replicas: 3
constraints: []

Edit the Default Replication Zone

To edit the default replication zone, create a YAML file defining only the values you want to change (other values will not be affected), and use the cockroach zone set .default -f <file.yaml> command with appropriate flags:

icon/buttons/copy
$ cat default_update.yaml
num_replicas: 5
icon/buttons/copy
$ cockroach zone set .default --insecure -f default_update.yaml
range_min_bytes: 1048576
range_max_bytes: 67108864
gc:
  ttlseconds: 86400
num_replicas: 5
constraints: []

Alternately, you can pass the YAML content via the standard input:

icon/buttons/copy
$ echo 'num_replicas: 5' | cockroach zone set .default --insecure -f -

Create a Replication Zone for a Database

To control replication for a specific database, create a YAML file defining only the values you want to change (other values will not be affected), and use the cockroach zone set <database> -f <file.yaml> command with appropriate flags:

icon/buttons/copy
$ cat database_zone.yaml
num_replicas: 7
icon/buttons/copy
$ cockroach zone set db1 --insecure -f database_zone.yaml
range_min_bytes: 1048576
range_max_bytes: 67108864
gc:
  ttlseconds: 86400
num_replicas: 5
constraints: []

Alternately, you can pass the YAML content via the standard input:

icon/buttons/copy
$ echo 'num_replicas: 5' | cockroach zone set db1 --insecure -f -

Create a Replication Zone for a Table

To control replication for a specific table, create a YAML file defining only the values you want to change (other values will not be affected), and use the cockroach zone set <database.table> -f <file.yaml> command with appropriate flags:

icon/buttons/copy
$ cat table_zone.yaml
num_replicas: 7
icon/buttons/copy
$ cockroach zone set db1.t1 --insecure -f table_zone.yaml
range_min_bytes: 1048576
range_max_bytes: 67108864
gc:
  ttlseconds: 86400
num_replicas: 7
constraints: []

Alternately, you can pass the YAML content via the standard input:

icon/buttons/copy
$ echo 'num_replicas: 7' | cockroach zone set db1.t1 --insecure -f -

Create a Replication Zone for System Ranges

In addition to the databases and tables that are visible via the SQL interface, CockroachDB stores additional data in what are called system ranges. There are three categories of system ranges for which replication zones can be set:

Zone Name Description
.meta The "meta" ranges contain the authoritative information about the location of all data in the cluster. If your cluster is running in multiple datacenters, it's a best practice to configure the meta ranges to have a copy in each datacenter.
.system The ".system" zone config controls the replication of a variety of important internal data, including information needed to allocate new table IDs and track the health of a cluster's nodes.
.timeseries The "timeseries" ranges contain monitoring data about the cluster that powers the graphs in CockroachDB's admin UI.

To control replication for one of the above sets of system ranges, create a YAML file defining only the values you want to change (other values will not be affected), and use the cockroach zone set <zone-name> -f <file.yaml> command with appropriate flags:

icon/buttons/copy
$ cat meta_zone.yaml
num_replicas: 7
icon/buttons/copy
$ cockroach zone set .meta --insecure -f meta_zone.yaml
range_min_bytes: 1048576
range_max_bytes: 67108864
gc:
  ttlseconds: 86400
num_replicas: 7
constraints: []

Alternately, you can pass the YAML content via the standard input:

icon/buttons/copy
$ echo 'num_replicas: 7' | cockroach zone set .meta --insecure -f -

Scenario-based Examples

Even Replication Across Datacenters

Scenario:

  • You have 6 nodes across 3 datacenters, 2 nodes in each datacenter.
  • You want data replicated 3 times, with replicas balanced evenly across all three datacenters.

Approach:

Start each node with its datacenter location specified in the --locality flag:

# Start the two nodes in datacenter 1:
$ cockroach start --insecure --host=<node1 hostname> --locality=datacenter=us-1
$ cockroach start --insecure --host=<node2 hostname> --locality=datacenter=us-1 \
--join=<node1 hostname>:26257

# Start the two nodes in datacenter 2:
$ cockroach start --insecure --host=<node3 hostname> --locality=datacenter=us-2 \
--join=<node1 hostname>:26257
$ cockroach start --insecure --host=<node4 hostname> --locality=datacenter=us-2 \
--join=<node1 hostname>:26257

# Start the two nodes in datacenter 3:
$ cockroach start --insecure --host=<node5 hostname> --locality=datacenter=us-3 \
--join=<node1 hostname>:26257
$ cockroach start --insecure --host=<node6 hostname> --locality=datacenter=us-3 \
--join=<node1 hostname>:26257

There's no need to make zone configuration changes; by default, the cluster is configured to replicate data three times, and even without explicit constraints, the cluster will aim to diversify replicas across node localities.

Multiple Applications Writing to Different Databases

Scenario:

  • You have 2 independent applications connected to the same CockroachDB cluster, each application using a distinct database.
  • You have 6 nodes across 2 datacenters, 3 nodes in each datacenter.
  • You want the data for application 1 to be replicated 5 times, with replicas evenly balanced across both datacenters.
  • You want the data for application 2 to be replicated 3 times, with all replicas in a single datacenter.

Approach:

  1. Start each node with its datacenter location specified in the --locality flag:

    # Start the three nodes in datacenter 1:
    $ cockroach start --insecure --host=<node1 hostname> --locality=datacenter=us-1
    $ cockroach start --insecure --host=<node2 hostname> --locality=datacenter=us-1 \
    --join=<node1 hostname>:26257
    $ cockroach start --insecure --host=<node3 hostname> --locality=datacenter=us-1 \
    --join=<node1 hostname>:26257
    
    # Start the three nodes in datacenter 2:
    $ cockroach start --insecure --host=<node4 hostname> --locality=datacenter=us-2 \
    --join=<node1 hostname>:26257
    $ cockroach start --insecure --host=<node5 hostname> --locality=datacenter=us-2 \
    --join=<node1 hostname>:26257
    $ cockroach start --insecure --host=<node6 hostname> --locality=datacenter=us-2 \
    --join=<node1 hostname>:26257
    
  2. On any node, configure a replication zone for the database used by application 1:

    icon/buttons/copy
    # Create a YAML file with the replica count set to 5:
    $ cat app1_zone.yaml
    
    num_replicas: 5
    
    icon/buttons/copy
    # Apply the replication zone to the database used by application 1:
    $ cockroach zone set app1_db --insecure -f app1_zone.yaml
    
    range_min_bytes: 1048576
    range_max_bytes: 67108864
    gc:
      ttlseconds: 86400
    num_replicas: 5
    constraints: []
    

    Nothing else is necessary for application 1's data. Since all nodes specify their datacenter locality, the cluster will aim to balance the data in the database used by application 1 between datacenters 1 and 2.

  3. On any node, configure a replication zone for the database used by application 2:

    icon/buttons/copy
    # Create a YAML file with 1 datacenter as a required constraint:
    $ cat app2_zone.yaml
    
    constraints: [+datacenter=us-2]
    
    icon/buttons/copy
    # Apply the replication zone to the database used by application 2:
    $ cockroach zone set app2_db --insecure -f app2_zone.yaml
    
    range_min_bytes: 1048576
    range_max_bytes: 67108864
    gc:
     ttlseconds: 86400
    num_replicas: 3
    constraints: [+datacenter=us-2]
    

    The required constraint will force application 2's data to be replicated only within the us-2 datacenter.

Stricter Replication for a Specific Table

Scenario:

  • You have 7 nodes, 5 with SSD drives and 2 with HDD drives.
  • You want data replicated 3 times by default.
  • Speed and availability are important for a specific table that is queried very frequently, however, so you want the data in that table to be replicated 5 times, preferably on nodes with SSD drives.

Approach:

  1. Start each node with ssd or hdd specified as store attributes:

    # Start the 5 nodes with SSD storage:
    $ cockroach start --insecure --host=<node1 hostname> --store=path=node1,attrs=ssd
    $ cockroach start --insecure --host=<node2 hostname> --store=path=node2,attrs=ssd \
    --join=<node1 hostname>:26257
    $ cockroach start --insecure --host=<node3 hostname> --store=path=node3,attrs=ssd \
    --join=<node1 hostname>:26257
    $ cockroach start --insecure --host=<node4 hostname> --store=path=node4,attrs=ssd \
    --join=<node1 hostname>:26257
    $ cockroach start --insecure --host=<node5 hostname> --store=path=node5,attrs=ssd \
    --join=<node1 hostname>:26257
    
    # Start the 2 nodes with HDD storage:
    $ cockroach start --insecure --host=<node6 hostname> --store=path=node6,attrs=hdd \
    --join=<node1 hostname>:26257
    $ cockroach start --insecure --host=<node7 hostname> --store=path=node2,attrs=hdd \
    --join=<node1 hostname>:26257
    
  2. On any node, configure a replication zone for the table that must be replicated more strictly:

    icon/buttons/copy
    # Create a YAML file with the replica count set to 5
    # and the ssd attribute as a required constraint:
    $ cat table_zone.yaml
    
    num_replicas: 5
    constraints: [+ssd]
    
    icon/buttons/copy
    # Apply the replication zone to the table:
    $ cockroach zone set db.important_table --insecure -f table_zone.yaml
    
    range_min_bytes: 1048576
    range_max_bytes: 67108864
    gc:
     ttlseconds: 86400
    num_replicas: 5
    constraints: [+ssd]
    

    Data in the table will be replicated 5 times, and the required constraint will place data in the table on nodes with ssd drives.

Tweaking the Replication of System Ranges

Scenario:

  • You have nodes spread across 7 datacenters.
  • You want data replicated 5 times by default.
  • For better performance, you want a copy of the meta ranges in all of the datacenters.
  • To save disk space, you only want the internal timeseries data replicated 3 times by default.

Approach:

  1. Start each node with a different locality attribute:
   $ cockroach start --insecure --host=<node1 hostname> --locality=datacenter=us-1
   $ cockroach start --insecure --host=<node2 hostname> --locality=datacenter=us-2 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node3 hostname> --locality=datacenter=us-3 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node4 hostname> --locality=datacenter=us-4 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node5 hostname> --locality=datacenter=us-5 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node6 hostname> --locality=datacenter=us-6 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node7 hostname> --locality=datacenter=us-7 \
   --join=<node1 hostname>:26257
  1. On any node, configure the default replication zone:

    icon/buttons/copy
   echo 'num_replicas: 5' | cockroach zone set .default --insecure -f -
   range_min_bytes: 1048576
   range_max_bytes: 67108864
   gc:
     ttlseconds: 86400
   num_replicas: 5
   constraints: []

All data in the cluster will be replicated 5 times, including both SQL data and the internal system data.

  1. On any node, configure the .meta replication zone:

    icon/buttons/copy
   echo 'num_replicas: 7' | cockroach zone set .meta --insecure -f -
   range_min_bytes: 1048576
   range_max_bytes: 67108864
   gc:
     ttlseconds: 86400
   num_replicas: 7
   constraints: []

The .meta addressing ranges will be replicated such that one copy is in all 7 datacenters, while all other data will be replicated 5 times.

  1. On any node, configure the .timeseries replication zone:

    icon/buttons/copy
   echo 'num_replicas: 3' | cockroach zone set .timeseries --insecure -f -
   range_min_bytes: 1048576
   range_max_bytes: 67108864
   gc:
     ttlseconds: 86400
   num_replicas: 7
   constraints: []

The timeseries data will only be replicated 3 times without affecting the configuration of all other data.

See Also

Other Cockroach Commands


Yes No
On this page

Yes No